Nokia 7210 SAS-Mxp - Global Commands

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Clears IPv4, IPv6, MAC, and log filter counters.
lag
Clears LAG-related entities.
log
Closes and reinitializes the log specified by log-id.
port
Clears port statistics.
qos
Clears QoS statistics.
radius
Clears the RADIUS server state.
router
Clears router commands affecting the router instance in which they are entered.
Values arp, authentication, bfd, dhcp, forwarding-table, icmp-redirect-route,
interface, isis, ldp, mpls, ospf, rip, rsvp
saa
Clears the SAA test results.
screen
Clears the console or telnet screen.
service
Clears service ID and statistical entities.
system
Clears or re-enables a previously failed reference.
tacplus
Clears the TACACS+ server state.
trace
Clears the trace log.
echo
Syntax
echo [text-to-echo] [extra-text-to-echo] [more-text]
Context
<GLOBAL>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
55
SPACER TEXT