EasyManua.ls Logo

Nokia 7210 SAS-Mxp - Bootstrap Load Process

Nokia 7210 SAS-Mxp
736 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
System contents
TiMOS Image
7210 SAS platforms
boot.tim
File
Golden
bootstrap
image
BOF
cf1:\ cf2:\
7210 SAS-R6
11
7210 SAS-R12
11
7210 SAS-S 1/10GE
12
7210 SAS-Sx 1/10GE
12
7210 SAS-Sx 10/100GE
12
7210 SAS-T
11
4.1.2 System boot option modes
When the system executes the boot.tim file, the bootstrap image searches for and processes the BOF.
The user has the option to modify the BOF manually and save it (see Manual mode for more information),
or to retrieve the BOF from the network (see Auto-init mode for more information).
Depending on whether the node is factory-shipped with the BOF, the user can obtain and use the BOF
as follows. See Table 19: Contents shipped with the system on 7210 SAS for information about which
platforms are factory-shipped with the BOF:
On 7210 SAS nodes that are factory-shipped with the BOF, use one of the following manual mode
options:
boot the system in manual mode by using the starter BOF; the system uses the default both.tim,
as configured in the default BOF
boot the system by interrupting the default boot process and manually edit the contents of the BOF
to create a new BOF
See the appropriate 7210 SAS chassis installation guide for more information about editing and creating
a new BOF for the specific 7210 SAS platform.
On 7210 SAS nodes that are factory-shipped without a BOF, the file is not present when the system is
powered on for the first time. Use one of the following options to obtain a BOF for the system:
boot the system by manually creating a BOF (manual mode)
11
No images are shipped on cf1:\. The user can purchase the software that is shipped with the boot.tim,
starter BOF, and TiMOS image on cf2:\.
12
No images are shipped on cf1:\. The user must purchase a software license to obtain an image on the SD
card. The SD card can be inserted into the SD card slot on the chassis to boot up the node. The software
is shipped with the boot.tim, starter BOF, and TiMOS image.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
122
SPACER TEXT

Table of Contents

Related product manuals