Nokia 7210 SAS-Mxp - System Configuration Process Overview; Configuration Notes

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
snmp
shutdown
exit
login-control
idle-timeout disable
pre-login-message "ala-1" name
exit
time
ntp
authentication-key 1 key "SV3BxZCsIvI" hash type message-digest
server 10.135.16.130
peer 10.0.0.1 key-id 1
no shutdown
exit
sntp
server-address 10.135.16.90 preferred
no shutdown
exit
zone UTC
exit
thresholds
rmon
exit
exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
security
hash-control read-version all write-version 1
telnet-server
ftp-server
snmp
community "private" rwa version both
community "public" r version both
exit
source-address
application ftp 10.135.16.97
application snmptrap 10.135.16.97
application ping 10.135.16.97
application dns 10.135.16.97
exit
exit
----------------------------------------------
*A:ALA>config>system#
6.15.7.1 Show command output and console messages
The show>system>information command displays the current value of the bad and good exec URLs and
indicates whether a post-boot configuration extension file was executed when the system was booted. If
an extension file was executed, the show>system>information command also indicates if it completed
successfully.
When executing a post-boot configuration extension file, status messages are output to the CONSOLE
screen before the ‟Login” prompt.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
318
SPACER TEXT