7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Example
The following is a sample output of a failed boot-up configuration that caused a boot-bad-exec file
containing another error to be executed.
Attempting to exec configuration file:
’ftp://test:test@192.168.xx.xxx/./12.cfg’ ...
System Configuration
Log Configuration
MAJOR: CLI #1009 An error occurred while processing a CLI command -
File ftp://test:test@192.168.xx.xxx/./12.cfg, Line 195: Command "log" failed.
CRITICAL: CLI #1002 An error occurred while processing the configuration file.
The system configuration is missing or incomplete.
MAJOR: CLI #1008 The SNMP daemon is disabled.
If desired, enable SNMP with the ’config>system>snmp no shutdown’ command.
Attempting to exec configuration failure extension file:
’ftp://test:test@192.168.xx.xxx/./fail.cfg’ ...
Config fail extension
Enabling SNMP daemon
MAJOR: CLI #1009 An error occurred while processing a CLI command -
File ftp://test:test@192.168.xx.xxx/./fail.cfg, Line 5: Command "abc log" failed.
TiMOS-B-x.0.Rx both/hops NOKIA Copyright (c) 2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Thu Nov 207 19:19:11 PST 2016 by builder in /rel5x.0/b1/Rx/panos/main
Login:
6.16 System timing
When synchronous Ethernet is enabled, the operator can select an Ethernet port as a candidate for timing
reference. The timing information recovered from this port is used to time the system.
6.16.1 CLI command syntax for 7210 SAS platforms
This section describes the CLI command syntax to enable synchronous Ethernet on specific 7210 SAS
platforms.
6.16.1.1 CLI syntax for 7210 SAS-Mxp
Example
The following is a sample CLI configuration for the 7210 SAS-Mxp.
*A:SAS-M2>config>system>sync-if-timing# info detail
----------------------------------------------
no ql-selection
ref-order ref1 ref2 ptp bits1 bits2
ref1
source-port 1/1/9
no shutdown
no ql-override
exit
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
319
SPACER TEXT
To Next Page
Loading...