Nokia 7210 SAS-Mxp - System Information

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
exit
exit
ptp
shutdown
no ql-override
exit
no revert
----------------------------------------------
*A:sasr_dutb>config>system>sync-if-timing#
6.16.1.3 CLI syntax for 7210 SAS-Sx/S 1/10GE
Example
The following is a sample CLI configuration for the 7210 SAS-Sx/S 1/10GE.
*7210SAS>config>system>sync-if-timing# info detail
----------------------------------------------
no ql-selection
ref-order ref1 ref2
ref1
shutdown
no source-port
no ql-override
exit
ref2
shutdown
no source-port
no ql-override
exit
no revert
----------------------------------------------
*7210SAS>config>system>sync-if-timing#
6.16.1.4 CLI syntax for 7210 SAS-T
Example
The following is a sample CLI configuration for the 7210 SAS-T.
*A:SAS>config>system>sync-if-timing# info detail
----------------------------------------------
no ql-selection
ref-order ref1 ref2 ptp bits1 bits2
ref1
shutdown
no source-port
no ql-override
exit
ref2
shutdown
no source-port
no ql-override
exit
bits1
interface-type ds1 esf
no ql-override
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
321
SPACER TEXT