7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
If the save attempt fails at the destination, an error occurs and is logged. The system does not try to save
the file to the secondary or tertiary configuration sources unless the path and filename are explicitly named
with the save command.
6.13 Basic system configuration
This section provides information to configure system parameters and provides configuration examples
of common configuration tasks. The minimal system parameters that should be configured are System
information parameters, Coordinates, and System time elements.
Example: Basic system configuration
A:ALA-12>config>system# info
#------------------------------------------
name "ALA-12"
coordinates "Unknown"
snmp
security
snmp
community "private" rwa version both
exit
exit
time
ntp
server 192.168.15.221
no shutdown
exit
sntp
shutdown
exit
zone GMT
exit
----------------------------------------------
A:ALA-12>config>system#
6.14 Common configuration tasks
This section provides an overview of the CLI commands used to configure the following system
parameters: System information, Coordinates, System time elements, and System administration
parameters.
6.14.1 System information
This section describes the basic system information parameters to configure the physical location of the
router, contact information, location information for the router such as an address, floor, and room number,
global positioning system (GPS) coordinates, and system name.
Use the CLI syntax displayed in this section to configure the system information parameters.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
293
SPACER TEXT
To Next Page
Loading...