7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
IMM types allowed, the software detects a errors in provisioning mismatch and marks the operational state
of the IMM to be down.
Note:
• The user can add in support for any IMM family type by repeated execution of this command.
IMM family type will be added, only if the current supported family types are compatible with
each other, else an error is returned.
• A change in the current value of IMM family requires a reboot of the node to take effect.
therefore, the user configured value for IMM family type takes effect only after the next reboot.
Default
no allow-imm-family
Parameters
imm-family
Specifies the type of IMM family type to be used in a chassis.
Values imm-sas-r-b, imm-sas-r-c
Default imm-sas-r-b
clli-code
Syntax
clli-code clli-code
no clli-code
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command creates a Common Language Location Identifier (CLLI) code string for the router. A CLLI
code is an 11-character standardized geographic identifier that uniquely identifies geographic locations and
certain functional categories of equipment unique to the telecommunications industry.
No CLLI validity checks other than truncating or padding the string to eleven characters are performed.
Only one CLLI code can be configured, if multiple CLLI codes are configured the last one entered
overwrites the previous entry.
The no form of this command removes the CLLI code.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
354
SPACER TEXT
To Next Page
Loading...