Nokia 7210 SAS-Mxp - System Boot Options for 7210 SAS-Sx 1;10 GE, 7210 SAS-S 1;10 GE, 7210 SAS-Sx 10;100 GE, and 7210 SAS-Mxp in Satellite Mode

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
During bootup, the bootrom searches for the boot.tim in the following locations in the specified order and
uses the image obtained from the first location where boot.tim is found to load the bootstrap image:
•
cf1:\ (internal USB)
•
cf2:\ (external flash)
•
uf1:\ (external USB)
If the boot.tim is not found in any of these locations, the boot procedure fails. If the boot.tim image
is found, the system searches for bof.cfg (the boot options file) on the same storage device in the root
directory. For example, if boot.tim is found on cf2:\, the system also looks for bof.cfg in cf2:\
bof.cfg.
If bof.cfg is found, the system uses the BOF to locate the TiMOS software (both.tim file), configuration
file, and other boot parameters, and processes them to boot the system. If the BOF is not found, the
system attempts to retrieve the BOF from the network using the auto-init mode and create a new BOF as
part of the auto-init process.
In some cases, the BOF may specify different storage device locations for the TiMOS image (both.tim)
and the configuration file. For example, the bootstrap image boot.tim file may be located on cf1:
\, but both.tim and the configuration file may not be located on this device. You can use the
show>system>information command to identify the location of the BOF and the boot.tim image used
to boot the system.
The following is a sample output of system information for the 7210 SAS-T.
*...........
Boot-loader Source : cf1:
BOF Source : cf1:
Image Source : primary
Config Source : N/A
Last Booted Config File: N/A
Last Boot Cfg Version : N/A
Last Boot Config Header: N/A
Last Boot Index Version: N/A
Last Boot Index Header : N/A
Last Saved Config : N/A
Time Last Saved : N/A
Changes Since Last Save: Yes
User Last Modified : admin
Time Last Modified : 2000/06/01 20:03:28
Max Cfg/BOF Backup Rev : 5
Cfg-OK Script : N/A
Cfg-OK Script Status : not used
Cfg-Fail Script : N/A
Cfg-Fail Script Status : not used
*A:SAST>show>system#
See System boot option modes for more information about the auto-init and manual boot option modes,
and how the system processes these options and loads the boot loader (boot.tim), the TiMOS image
(both.tim), and the configuration file to make the system operational and ready for use.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
128
SPACER TEXT