7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
4.13.2.1 Configuration commands
• File management commands
• BOF processing control
• Console port configuration
• Image and configuration management
• DNS configuration commands
4.13.2.1.1 File management commands
bof
Syntax
bof
Context
<ROOT>
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the boot options file (BOF) for the specified local storage device.
A BOF file specifies where the system searches for runtime images, configuration files, and other
operational parameters during system initialization.
BOF parameters can be modified, and changes can be saved to a specified compact flash. The BOF must
be located in the root directory of either an internal or external compact flash local to the system and have
the mandatory filename of bof.cfg.
When modifications are made to in-memory parameters that are currently in use or operating, the
changes are effective immediately. For example, if the console speed is changed, the change takes place
immediately.
Only one entry of the BOF configuration command statement can be saved after the statement has been
found to be syntactically correct.
No default BOF exists.
encrypt
Syntax
encrypt {on | off}
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
179
SPACER TEXT
To Next Page
Loading...