Nokia 7210 SAS-Mxp - Page 209

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
The node boots up in standalone mode when the host-type parameter is set to
standalone.
standalone-vc
The node boots up in standalone VC mode when the host-type parameter is set to
standalone-vc.
4.13.2.1.5 DNS configuration commands
dns-domain
Syntax
dns-domain dns-name
no dns-domain
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the domain name used when performing DNS address resolution. This is a
required parameter if DNS address resolution is required. Only a single domain name can be configured. If
multiple domain statements are configured, the last one encountered is used.
The no form of this command removes the domain name from the configuration.
Default
no dns-domain
Parameters
dns-name
Specifies the DNS domain name up to 32 characters.
primary-dns
Syntax
primary-dns ip-address
no primary-dns [ip-address]
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
209
SPACER TEXT