Nokia 7210 SAS-Mxp - Page 210

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the primary DNS server used for DNS name resolution. DNS name resolution
can be used when executing ping, traceroute, and service-ping, and also when defining file URLs. DNS
name resolution is not supported when DNS names are embedded in configuration files.
The no form of this command removes the primary DNS server from the configuration.
Default
no primary-dns
Parameters
ip-address
The IP address of the primary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
secondary-dns
Syntax
secondary-dns ip-address
no secondary-dns [ip-address]
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the secondary DNS server for DNS name resolution. The secondary DNS server
is used only if the primary DNS server does not respond.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
210
SPACER TEXT