Nokia 7210 SAS-Mxp - Page 211

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also
when defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of this command removes the secondary DNS server from the configuration.
Default
no secondary-dns
Parameters
ip-address
Specifies the IP address of the secondary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
tertiary-dns
Syntax
tertiary-dns ip-address
no tertiary-dns [ip-address]
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the tertiary DNS server for DNS name resolution. The tertiary DNS server is
used only if the primary DNS server and the secondary DNS server do not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also
when defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of this command removes the tertiary DNS server from the configuration.
Default
no tertiary-dns
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
211
SPACER TEXT