7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
interval seconds
Specifies the polling period over which the data is sampled and compared with the rising
and falling thresholds
Values 1 to 2147483647
rmon-event-type
Specifies the type of notification action to be taken when this event occurs
Values log — An entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The RMON-
MIB log table entries can be viewed using the show system
thresholds command.
trap — A TiMOS logger event is generated. The TiMOS logger utility
then distributes the notification of this event to its configured log
destinations which may be CONSOLE, telnet session, memory log,
cflash file, syslog, or SNMP trap destinations logs.
both — Both an entry in the RMON-MIB logTable and a TiMOS logger
event are generated.
none — No action is taken.
Default both
startup-alarm alarm-type
Specifies the alarm that may be sent when this alarm is first created. If the first sample is
greater than or equal to the rising threshold value and startup-alarm is equal to rising or
either, a single rising threshold crossing event is generated. If the first sample is less than
or equal to the falling threshold value and startup-alarm is equal to falling or either, a
single falling threshold crossing event is generated.
Values rising, falling, either
Default either
kb-memory-use-warn
Syntax
kb-memory-use-warn rising-threshold threshold [falling-threshold threshold] interval seconds [rmon-
event-type] [startup-alarm alarm-type]
no kb-memory-use-warn
Context
config>system>thresholds
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
376
SPACER TEXT
To Next Page
Loading...