7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
virtual-chassis
Syntax
virtual-chassis {slotid | slotid-range} image-sync
Context
admin
Platforms
7210 SAS-Sx 1/10GE standalone-VC, 7210 SAS-S 1/10GE: standalone-VC
Description
This command upgrades the boot.tim file on the IMM-only node in a virtual chassis (VC) and ensures that
on the next reboot of the node, the newer bootloader image is used to boot the system. Bootloader images
are copied to all the available storage locations on the card, ensuring that a back up copy is available if the
primary storage device fails.
The boot.tim file can be upgraded on a single IMM-only node or on a range of IMM-only nodes in a VC.
The image-sync keyword initiates image synchronization of the IMM-only node. It copies the boot.tim from
the active CPM to the card/node identified by the slot-id or slotid-range parameter.
Parameters
slotid
Specifies the card slot number.
Values 1 to 8
slotid-range
Specifies the card slot numbers for a range of cards.
Values 1 to 8
image-sync
Keyword to initiate image synchronization of the IMM-only node.
6.20.2.1.17 System alarm contact commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
464
SPACER TEXT
To Next Page
Loading...