7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
ref1
Specifies that the clock will use the first timing reference.
ref2
Specifies that the clock will use the second timing reference.
ptp
Specifies that the clock will use PTP as a timing reference. This keyword is only supported
on 7210 SAS-T, 7210 SAS-Sx 1/10GE, 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
platforms.
bits1
Specifies that the clock will use the BITS1 port as timing reference. This keyword is only
supported on 7210 SAS-Mxp, 7210 SAS-T, 7210 SAS-R6 and 7210 SAS-R12 platforms.
bits2
Specifies that the clock will use BITS2 port as the timing reference. This keyword is only
supported on the 7210 SAS-T.
system
Syntax
[no] system
Context
debug
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays system debug information.
ntp
Syntax
ntp [router router-name] [interface ip-int-name]
Context
debug>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
673
SPACER TEXT
To Next Page
Loading...