Nokia 7210 SAS-Mxp - Page 674

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Description
This command enables and configures debugging for NTP.
The no form of this command disables debugging for NTP.
Parameters
router-name
Base, management
Default Base
ip-int-name
Specifies the name of the IP interface. The name can be up to 32 characters and must
begin with a letter. If the string contains special characters (#, $, spaces, and so on), the
entire string must be enclosed within double quotes.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
674
SPACER TEXT