Nokia 7210 SAS-Mxp - Page 456

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
The command creates a string that can be used to identify the purpose of this event. This is an optional
parameter and can be 80 characters. If the string contains special characters (#, $, spaces, and so on), the
entire string must be enclosed within double quotes.
6.20.2.1.16 System administration commands
admin
Syntax
admin
Context
<root>
Platforms
Supported on all 7210 SAS platforms as described in this document
Description
Commands in this context configure administrative system commands. Only authorized users can execute
the commands in the admin context.
auto-init
Syntax
auto-init stop
Context
admin
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode; not supported on 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS platforms
configured in the standalone-VC operating mode
Description
This command specifies that the system saves the BOF with the BOF parameter primary-image pointing to
the both.tim on the local flash. When the system boots up for the first-time, auto-init can potentially use the
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
456
SPACER TEXT