Nokia 7210 SAS-Mxp - Page 457

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
TiMOS images available on the local flash to boot up and provide a user login prompt. With this command,
user is provided with an option to stop the auto-init process and complete successful boot.
If the user does not use this command to stop the auto-init process, the system reboots and attempts to
find the BOF again using DHCP.
debug-save
Syntax
debug-save file-url
Context
admin
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command saves existing debug configuration. Debug configurations are not preserved in configuration
saves.
Parameters
file-url
Specifies the file URL location to save the debug configuration.
Values file-url — local-url | remote-url
local-url — [cflash-id/ | usb-flash-id] [file-path]
255 chars maximum, including cflash-id
directory length 99 characters maximum each
remote url — [{ftp://} login:password@remote-location/][file- path]
255 characters maximum
directory length 99 characters maximum each
remote-location — [hostname | ipv4-address]
ipv4-address — a.b.c.d
uf1: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 1/10GE: standalone and
standalone-VC, and 7210 SAS-Sx 10/
100GE)
usb-flash-id
—
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
457
SPACER TEXT