Nokia 7210 SAS-Mxp - Page 458

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx
1/10GE: standalone and standalone-VC)
cflash-id —
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
disconnect
Syntax
disconnect {address ip-address | username user-name | console | telnet | ftp | ssh | netconf}
Context
admin
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command disconnects a user from a console, Telnet, FTP, or SSH session.
If any of the console, Telnet, FTP, SSH, or NETCONF options are specified, only the respective console,
Telnet, FTP, SSH, or NETCONF sessions are affected.
If no console, Telnet, FTP, SSH, or NETCONF options are specified, all sessions from the IP address or
from the specified user are disconnected.
Any task that the user is executing is terminated. FTP files accessed by the user will not be removed.
A major severity security log event is created specifying what was terminated and by whom.
Parameters
address ip-address
Specifies the IP address to disconnect, specified in dotted-decimal notation.
Values ipv4-address — a.b.c.d
ipv6-address — x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
username user-name
Specifies the name of the user.
console
Keyword to disconnect the console session.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
458
SPACER TEXT