Nokia 7210 SAS-Mxp - Page 455

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Values slot/mda/port
6.20.2.1.15 Generic commands
shutdown
Syntax
[no] shutdown
Context
config>system>time>sntp
config>system>lldp
config>system>sync-if-timing>ptp
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Note:
The config>system>sync-if-timing>ptp context is not supported on 7210 SAS-Sx 10/100GE-Sx
10/100GE and 7210 SAS-S 1/10GE platforms.
This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The noform of this command administratively enables an entity.
Unlike other commands and parameters where the default state is not indicated in the configuration file, the
shutdown and no shutdown states are always indicated in system generated configuration files.
The no form of this command places an entity in an administratively enabled state.
description
Syntax
description description-string
no description
Context
config>system>time>sntp
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
455
SPACER TEXT