Nokia 7210 SAS-Mxp - Page 469

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Default
shutdown
trigger-alarm-msg
Syntax
[no] trigger-alarm-msg {alarm-msg-text}
Context
config>system>alarm-contact-input
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description
This command allows the user to configure a text message for use along with SNMP trap and Log
message that are sent when the system generates an alarm. The system generates a default message if
the message is not configured.
The no form of this command removes the configured alarm trigger message.
Parameters
alarm-msg-text
Specifies a printable character string, up to 160 characters.
6.20.2.1.18 Redundancy commands
redundancy
Syntax
redundancy
Context
admin
config
Platforms
7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE: standalone-VC
Description
Commands in this context configure redundancy operations.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
469
SPACER TEXT