7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
File system management
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command enables access to the context to enter and perform file system operations. When entering
the file context, the prompt changes to reflect the present working directory. Navigating the file system with
the cd command results in a changed prompt.
The exit all command leaves the file system/file operation context and returns to the <root> CLI context.
The state of the present working directory is maintained for the CLI session. Entering the file command
returns the cursor to the working directory where the exit command was issued.
format
Syntax
format cflash cflash-id
Context
root>file
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command formats the compact flash. The compact flash must be shutdown before starting the format.
Parameters
cflash-id
Specifies the compact flash type.
Values
cflash-id cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx
1/10GE: standalone and standalone-VC,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B:
(7210 SAS-R6 and 7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx 1/10GE: standalone
and standalone-VC)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
111
SPACER TEXT
To Next Page
Loading...