7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
Figure 11: Front panel: 7210 SAS-Mxp console port
4.11.3.9.2 7210 SAS-R6 console port
The 7210 SAS-R6 is a service-aware MPLS-capable switch, suitable as an MPLS Ethernet access
aggregation platform. The 7210 SAS-R6 can aggregate 1G and 10G rings in access Ethernet networks.
The platform supports full line-rate redundant switching capacity, as well as MPLS and MPLS-TP-based
service transport. It supports control-plane and switch fabric redundancy.
The following figure shows an example of the console port on a 7210 SAS-R6 front panel.
Figure 12: Front panel: 7210 SAS-R6 console port
Note:
See the 7210 SAS-R6 Chassis Installation Guide to know the IMMs supported.
4.11.3.9.3 7210 SAS-R12 console port
The 7210 SAS-R12 is a service-aware IP MPLS-capable switch, suitable as an IP MPLS and Carrier
Ethernet access aggregation platform. The 7210 SAS-R12 can aggregate 1G and 10G rings in access
Ethernet networks. The platform supports full line-rate redundant switching capacity, as well as MPLS and
MPLS-TP based service transport. It supports control-plane and switch fabric redundancy.
The following figure shows an example of the Console port on a 7210 SAS-R12 front panel.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
164
SPACER TEXT
To Next Page
Loading...