7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
Label Description
dns domain The domain name used when performing DNS address
resolution
uplinkA-address Displays the uplinkA IP address
uplinkA-autoneg Displays the auto-negotiation of the management Ethernet port
uplinkA-duplex Displays full duplex operation
uplinkA-speed Displays the 1000 M/bps operation
uplinkA-port Displays the primary port to be used for auto-init
uplinkA-route Displays the static route associated with uplinkA
uplinkA-vlan Displays the VLAN ID to be used on uplinkA
uplinkB-address Displays the uplinkB IP address
uplinkB-autoneg Displays the auto-negotiation of the management Ethernet port
uplinkB-duplex Displays full duplex operation
uplinkB-speed Displays the 1000 M/bps operation
uplinkB-port Displays the secondary port to be used for auto-init
uplinkB-route Displays the static route associated with uplinkB
uplinkB-vlan Displays the VLAN ID to be used on uplinkB
uplink-mode This parameter displays the uplink mode of the device
7210 SAS-T devices can be configured in either network mode
or access-uplink mode
no-service-ports Displays the ports on which service traffic is not processed
use-expansion-card-
type
Displays the expansion card type
console-disabled Displays the status of serial port console
eth-mgmt-disabled Displays if Ethernet management is disabled
eth-mgmt-address Displays the Ethernet management address
eth-mgmt-route Displays the Ethernet Management route
eth-mgmt-autoneg Displays if auto-negotiate is enabled
eth-mgmt-duplex Displays the mode of the Ethernet management port
eth-mgmt-speed Displays the Ethernet management speed
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
218
SPACER TEXT
To Next Page
Loading...