Nokia 7210 SAS-Mxp - Page 329

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Example: Global system LLDP configuration
A:7210-SAS>config>system>lldp# info
----------------------------------------------
tx-interval 10
tx-hold-multiplier 2
reinit-delay 5
notification-interval 10
----------------------------------------------
A:7210-SAS>config>system>lldp#
6.20 System command reference
6.20.1 Command hierarchies
• Configuration Commands
– System information commands
– Virtual chassis (VC) configuration commands
– VWM shelf management commands for 7210 SAS-R6 and 7210 SAS-R12
– VWM shelf management commands for 7210 SAS-Mxp and 7210 SAS-T
– System alarm commands
– PTP commands
– System time commands
– CRON commands
– Script control commands
– System administration (admin) commands
– High availability (redundancy) commands
– Configuration rollback commands for the 7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
– Multi-chassis LAG commands
– System port LAG MAC assignment commands for 7210 SAS-Mxp standalone, 7210 SAS-T,
7210 SAS-Sx 10/100GE standalone, and 7210 SAS-Sx 1/10GE: standalone and standalone-VC
– System alarm contact commands
– System Synchronization Commands
• System synchronization commands for 7210 SAS-T
• System synchronization commands for 7210 SAS-Mxp
• System synchronization commands for 7210 SAS-R6 and 7210 SAS-R12
• System synchronization commands for 7210 SAS-Sx 1/10GE, 7210 SAS-S 1/10GE, and
7210 SAS-Sx 10/100GE
– LLDP system commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
329
SPACER TEXT