Nokia 7210 SAS-Mxp - Page 462

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
interface — 32 characters maximum, for link local addresses
uf1: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 1/10GE: standalone and
standalone-VC, and 7210 SAS-Sx 10/
100GE)
usb-flash-id
—
uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1:, cf2: (7210 SAS-T, 7210 SAS-Mxp,
7210 SAS-Sx 10/100GE, and 7210 SAS-Sx
1/10GE: standalone and standalone-VC)
cflash-id —
cf2:, cf2-A:, cf2-B: (7210 SAS-R6 and
7210 SAS-R12)
Default the primary configuration file location
detail
Keyword to save both default and non-default configuration parameters.
index
Keyword to force a save of the persistent index file regardless of the persistent status in
the BOF file. The index option can also be used to avoid an additional boot required while
changing your system to use the persistence indexes.
enable-tech
Syntax
[no] enable-tech
Context
admin
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command enables the shell and kernel commands.
Note:
This command should only be used with authorized direction from the Nokia Technical Assistance
Center (TAC).
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
462
SPACER TEXT