7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Context
config>system>rollback
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description
The location and filename of the rescue configuration is configurable to be local (on the compact flash) or
remote. The suffix ‟.rc” will be automatically appended to the filename when a rescue configuration file is
saved. Trivial FTP (tftp) is not supported for remote locations.
A valid rescue location must be configured before a rescue configuration is saved.
rollback-location
Syntax
no rollback-location file-url
Context
config>system>rollback
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description
This command configures the location and generic filename of the rollback rescue configuration file.
A rescue file can be saved locally on the compact flash or on a remote device. The file URL must not
contain a suffix, just a path/directory and filename. The suffixes for rollback checkpoint files are ‟.rb”,
".rb.1", ..., ".rb.9" and are automatically appended to rollback checkpoint files.
A valid rollback-location must be configured before a rollback save command is executed.
Parameters
file-url
Specifies the local or remote file path for the rollback rescue configuration file.
Values file-url — local-url | remote-url
local-url — [cflash-id/] [file-path]
255 chars maximum, including cflash-id
directory length 99 characters maximum each
remote url — [{ftp://} login:password@remote-location] [file-path]
255 characters maximum
directory length 99 characters maximum each
remote-location — [hostname | ipv4-address | ipv6-address]
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
485
SPACER TEXT
To Next Page
Loading...