Nokia 7210 SAS-Mxp - Page 504

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
enable-bgp3107-frr
Syntax
enable-bgp-3107-frr
no enable-bgp3107-frr
Context
config>system>resource-profile
Platforms
7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE
Description
This command enables the allocation of MPLS FIB and protection group resources required for enabling
uniform fast reroute (FRR) for BGP RFC 3107 LU routes resolved using RSVP-TE LSPs. This is a per-
node configuration and enabling the command affects all BGP LU routes.
Caution:
If the command is enabled, the amount of resources required is twice the amount required
without uniform FRR, and the number of BGP LU routes that can be accommodated in the MPLS
FIB is therefore halved if uniform FRR is enabled. Ensure that sufficient MPLS resources are
available to accommodate all required BGP LU routes before using this command.
The no form of this command disables the use of uniform FRR for BGP LU routes.
Default
no enable-bgp3107-frr
enable-ldporsvp-frr
Syntax
enable-ldporsvp-frr
no enable-ldporsvp-frr
Context
config>system>resource-profile
Platforms
7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE
Description
This command enables the allocation of MPLS FIB and protection group resources required for enabling
uniform FRR for LDP-over-RSVP LSPs (LDP FECs resolved using RSVP-TE LSPs). This is a per-node
configuration and enabling the command affects all LDP-over-RSVP LSPs.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
504
SPACER TEXT