Nokia 7210 SAS-Mxp - Page 544

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
ingress QoS policies (configured with the command config system resource-profile
ingress-internal-tcam qos-sap-ingress-resource command) and chunks are available
for use.
Values The following table lists the parameter values.
Table 58: Number of resources available for ipv6-ipv4-match-enable
Platforms Min value
(per node)
Max value
(per node)
Default
values
7210 SAS-T Access-Uplink mode (per node) 0 7 0
7210 SAS-T Network Mode (per node) 0 6 0
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
0 12 max
7210 SAS-R6 and 7210 SAS-R12 (per IMM-
c)
0 10 max
7210 SAS-Mxp (per node) 0 10 0
7210 SAS-Sx 1/10GE (per node) (standalone) 0 7 0
7210 SAS-Sx 1/10GE (standalone-VC) 0 6 0
7210 SAS-S 1/10GE (per node) (standalone) 0 7 0
7210 SAS-S 1/10GE (standalone-VC) 0 6 0
7210 SAS-Sx 10/100GE (per node) 0 3 0
ip-mpls-protocols
Syntax
ip-mpls-protocols num-resources
no ip-mpls-protocols
Context
config>system>resource-profile>ing-internal-tcam
Platforms
7210 SAS-Mxp
Description
This command configures an additional slice from the ingress-internal-tcam resource pool for use by the IP
and MPLS protocols.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
544
SPACER TEXT