Nokia 7210 SAS-Mxp - Page 558

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
space needed for an IPv4 address prefix. Additionally, the user must account for resources
required for IPv6 primary and secondary addresses assigned to an IPv6 interface.
• The number of entries available for IP routes received from a peer is equal to the total number
of L3 forwarding entries supported for the platform subtracted by the number of entries
specified by this command.
• The software allocates entries from this pool on a FCFS (first come first serve) model based
on the order of configuration of IP interfaces. An error is generated when the maximum limit is
reached.
Default
no max-ip-subnets (Software allocates a fixed number of entries towards this to maintain backward
compatibility with releases prior to Release 7.0.R3).
Parameters
number
Specifies the number of IP subnets for directly connected IP interfaces.
Values The following table lists the parameter values.
The minimum number of IPv6 interfaces is 2.
Table 62: Number of resources available for maximum IP subnets
Platforms Min value
(per node)
Max value (per
node)
Default values
7210 SAS-T 1 12000 500
7210 SAS-R6 (IMMv2) 1 28672 2000
7210 SAS-R12 1 28672 2000
7210 SAS-R6 and 7210 SAS-
R12 IMM-c
1 12288 2000
7210 SAS-Mxp 1 28672 850
7210 SAS-Sx 1/10GE
(standalone and standalone-VC)
1 12288 2000
7210 SAS-S 1/10GE (standalone
and standalone-VC)
1 12288 2000
7210 SAS-Sx 10/100GE 1 12288 2000
max-ipv6-routes
Syntax
[no] max-ipv6-routes number
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
558
SPACER TEXT