Nokia 7210 SAS-Mxp - Page 574

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
A:ALA-12#
cpu
Syntax
cpu [sample-period seconds]
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays CPU utilization per task over a sample period.
Parameters
sample-period seconds
Specifies the number of seconds over which to sample CPU task utilization.
Default 1
Values 1 to 5
Output
The following output is an example of CPU information, and Table 65: Output fields: system CPU describes
the output fields.
Sample output
*A:cses-E11# show system cpu sample-period 2
===============================================================================
CPU Utilization (Sample period: 2 seconds)
===============================================================================
Name CPU Time CPU Usage Capacity
(uSec) Usage
-------------------------------------------------------------------------------
BFD 10 ~0.00% ~0.00%
BGP 0 0.00% 0.00%
CFLOWD 61 ~0.00% ~0.00%
Cards & Ports 8,332 0.41% 0.08%
DHCP Server 79 ~0.00% ~0.00%
ICC 408 0.02% 0.01%
IGMP/MLD 1,768 0.08% 0.08%
IOM 17,197 0.85% 0.31%
IP Stack 4,080 0.20% 0.09%
IS-IS 1,213 0.06% 0.06%
ISA 2,496 0.12% 0.07%
LDP 0 0.00% 0.00%
Logging 32 ~0.00% ~0.00%
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
574
SPACER TEXT