7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
SNMP Engine Boots The number of time the SNMP agent has restarted
It is typically equivalent to the number of times the node has
rebooted.
SNMP Max Message
Size
The maximum SNMP packet size generated by this node
SNMP Admin State Enabled — SNMP is administratively enabled and running
Disabled — SNMP is administratively shut down and not running
SNMP Oper State Enabled — SNMP is operationally enabled
Disabled — SNMP is operationally disabled
SNMP Index Boot
Status
Persistent — System indexes are saved between reboots
Not Persistent — System indexes are not saved between
reboots
SNMP Sync State Indicates whether the SNMP persistence information database
has been successfully synchronized between the active and
standby CPM
This field is available on 7210 SAS-R6, 7210 SAS-R12, and
7210 SAS-Sx/S 1/10GE: standalone-vc platforms.
Tel/Tel6/SSH/FTP/
Admin
The administrative state of the Telnet, Telnet IPv6, SSH, and
FTP sessions
Tel/Tel6/SSH/FTP/
Oper
The operational state of the Telnet, Telnet _IPv6, SSH, and FTP
sessions
Boot-loader source The location of the bootloader
BOF source The location of the BOF
Image Source Primary — Indicates that the directory location for runtime image
file was loaded from the primary source
Secondary — Indicates that the directory location for runtime
image file was loaded from the secondary source.
Tertiary — Indicates that the directory location for runtime image
file was loaded from the tertiary source
Config Source Primary — Indicates that the directory location for configuration
file was loaded from the primary source
Secondary — Indicates that the directory location for
configuration file was loaded from the secondary source
Tertiary — Indicates that the directory location for configuration
file was loaded from the tertiary source
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
585
SPACER TEXT
To Next Page
Loading...