Nokia 7210 SAS-Mxp - Page 588

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
IGMP No limit 0 0 0
MMPI No limit 0 0 0
MFIB No limit 0 0 0
PIP No limit 79,943,024 79,943,024 78,895,248
MBUF 67,108,864 5,837,328 5,837,328 4,834,280
-------------------------------------------------------------------------------
Current Total Size : 343,495,200 bytes
Total In Use : 324,492,768 bytes
Available Memory : 640,178,652 bytes
===============================================================================
A:ALA-1#
Table 69: Output fields: memory pool
Label Description
Name The name of the system or process
Max Allowed Integer — The maximum allocated memory size
No — Limit No size limit
Current Size The current size of the memory pool
Max So Far The largest amount of memory pool used
In Use The current amount of the memory pool currently in use
Current Total Size The sum of the Current Size column
Total In Use The sum of the In Use column
Available Memory The amount of available memory
ntp
Syntax
ntp [{peers | peer peer-address} | {servers | server server-address} |[all]] [detail]
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document
Description
This command displays NTP protocol configuration and state.
Output
The following output is an example of NTP information, and Table 70: Output fields: NTP describes the
output fields.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
588
SPACER TEXT