Nokia 7210 SAS-Mxp - Page 596

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
Last Revert Initiated
Time
The date and time when the last rollback was initiated
Last Revert Completion
Time
The date and time when the last rollback was completed
Delete
Last Rollback Delete
Result
The status of the last rollback checkpoint file deletion
Rollback Files
Idx The rollback checkpoint file ID
Suffix The rollback checkpoint file suffix
Comment User comments about the rollback checkpoint file
Creation Time The date and time when the file was created
Release The software load that the checkpoint file was created in
User The user who created the file
resource-profile
Syntax
resource-profile [active | configured]
resource-profile [active | configured] policy-id [detail]
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays the resource-profile protocol configuration and state.
Parameters
active | configure
Displays active or configured values. Active values are those in use by the system
currently. Configured values are those that have been changed by the user and have not
taken effect. For the system resource profile parameters that need a reboot to take effect,
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
596
SPACER TEXT