Nokia 7210 SAS-Mxp - Page 612

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
Time Source Displays the time-source parameter sent in the 1588 announce
message
peer
Syntax
peer ip-address [router router-instance | service-name service-name] [detail]
Context
show>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network and
access-uplink)
Description
This command displays information for a specific peer.
Parameters
ip-address
Specifies the IP address of the peer.
Values a.b.c.d
router-instance
Displays only the information for a specific router instance.
Values router-name: Base
vprn-svc-id: 1 to 2147483647
service-name
Specifies the service name to identify the router instance, up to 64 characters.
detail
Displays detailed information.
Output
The following output is an example of PTP information for a single peer, and Table 75: Output fields: PTP
peer describes the output fields.
Sample output
*A:Dut-F>config>system>ptp# show system ptp peer 192.168.10.5
===============================================================================
IEEE 1588/PTP Peer Information
===============================================================================
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
612
SPACER TEXT