7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
Slot-ID Card identifier used to identify the card inserted into the slot #1
of the 1830 device
Provisioned Type User provisioned card-type to identify the module inserted into
the 1830 device
Equipped Type The card-type currently inserted into the slot on the 1830 device
No of Slots The number of slots available on the 1830 device
Part Number The 1830 VWM CWDM device part number
CLEI code CLEI code of the 1830 device
Unit Mnemonic The Mnemonic string used to identify the card
Serial Number The 1830 device serial number
Manufacturing Date The manufacturing date of the card
Administrative state The administrative state of the 1830 device
If the shelf or card is provisioned and if no shutdown is executed,
the this field displays UP, else it displays 'Down'.
Operational state The operational state of the 1830 device
It is set to UP if the 7210 SAS device is able to communicate and
retrieve information from the 1830 device connected to it. It is set
to Down otherwise.
Current Alarm state Displays if alarm is active or cleared
time
Syntax
time
Context
show
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays the current day, date, time and time zone.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
635
SPACER TEXT
To Next Page
Loading...