Nokia 7210 SAS-Mxp - Page 658

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Label Description
Executing run
histories
Displays the number of sessions in the process of executin.
Initializing run
histories
Displays the number of sessions ready to run/queued but not
executed
Max time run history
saved
Displays the maximum length of time to keep the results from a
script run
Last change Displays the system time that a change was made to the
configuration
chassis
Syntax
chassis [environment] [power-supply]
Context
show
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays general chassis status information.
For a virtual chassis (VC), this command displays information about the entire VC. Hardware information
can be displayed for individual CPMs, IMMs, power supplies, and fans.
Parameters
environment
Displays chassis environmental status information.
Default all chassis information
power-supply
Displays only power-supply information.
Output
The following outputs are examples of chassis information, and Table 92: Output fields: chassis describes
the output fields.
• Sample output for 7210 SAS-T
• Sample output for 7210 SAS-Sx/S 1/10GE
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
658
SPACER TEXT