7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
sync-if-timing
Syntax
sync-if-timing {ref1 | ref2 | bits1 | bits2}
Context
clear>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in
the access-uplink operating mode; not supported on platforms configured in the standalone-VC operating
mode
Description
This command individually clears (re-enable) a previously failed reference. As long as the reference is one
of the valid options, this command is always executed. An inherent behavior enables the reverted mode
which causes a re-evaluation of all available references.
Parameters
ref1
Clears the first timing reference.
ref2
Clears the second timing reference.
bits1
Clears the BITS1 port reference. This keyword is only supported on 7210 SAS-Mxp,
7210 SAS-T, 7210 SAS-R6 and 7210 SAS-R12 platforms.
bits2
Clears the BITS2 port reference. This keyword is only supported on 7210 SAS-T and
7210 SAS-Mxp platforms.
trace
Syntax
trace log
Context
clear
Platforms
Supported on all 7210 SAS platforms as described in this document
Description
This command allows an operator to clear the trace log.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
671
SPACER TEXT
To Next Page
Loading...