Nokia 7210 SAS-Mxp - Page 705

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Appendix: 7210 SAS boot
procedures
SyncE : Enabled
PTP-TC : Disabled
Client-Down-Delay : Disabled
Console Access : Enabled
Hardware Data
Platform type : N/A
Part number : 3HE11597AARA01
CLEI code : INM3110ARA
Serial number : NS1734T0028
Manufacture date : 09182017
Manufacturing deviations : (Not Specified)
Manufacturing assembly number :
Administrative state : up
Operational state : up
Temperature : 48C
Temperature threshold : 85C
Software boot (rom) version : X-11.0.R4 on Wed Jul 10 13:44:15 IST 2019
by sasbuild
Software version : TiMOS-B-20.3.B1-3 both/hops Nokia SAS-Sx
64SFP+4QSFP28 7210 Copyright (c) 2000-2020
Nokia.
All rights reserved. All use subject to
applicable license agreements.
Built on Fri Mar 20 16:50:24 IST 2020 by
sasbuild in /home/sasbuild/20.3B1/panos/ma
Time of last boot : 2019/11/14 13:16:39
Current alarm state : alarm cleared
Base MAC address : d0:99:d5:a6:34:41
7.5 Procedure to boot in the standalone-VC mode
About this task
Note:
• This procedure is only supported on the 7210 SAS-S 1/10GE, 7210 SAS-Sx 1/10GE, and their
variants.
• See Provisioning and booting up the VC in standalone mode for more information.
Perform the following steps to boot the 7210 SAS device in the standalone-VC mode of operation:
Procedure
Step 1. Power on the 7210 SAS device.
Step 2. Use the OOB Ethernet management port to boot form the network.
Example
A:NS1722T0086# admin reboot now
Resetting...OK
Nokia SAS-S 7210 Boot ROM. Copyright 2000-2018 Nokia.
All rights reserved. All use is subject to applicable license agreements.
Build: X-11.0.B1-6 on Thu Dec 6 15:22:31 IST 2018 by sasbuild
Version: 0x1F
DRAM test first stage
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
705
SPACER TEXT