7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Appendix: 7210 SAS boot
procedures
vc-stack-node-type imm-only
Hit a key within 2 seconds to change boot parameters...
Step 10. At the prompt, press any key to initiate boot parameter updates.
The following console output is displayed.
Example
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
Waiting for 30 seconds to enter password
Password:
Step 11.
At the prompt, enter the default password password, and initiate the BOF edit.
The system accepts the password and the following console output is displayed.
Example
You must supply some required Boot Options. At any prompt, you can type:
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with with existing values.
"diag" - enter the diag shell.
"reset" - reset the bof and reboot.
Press ENTER to begin, or 'flash' to enter firmware update...
Step 12. At the prompt, press Enter to edit the BOF. The following console output is displayed.
Example
Chassis-Role
-------------
Current chassis-role is : standalone-vc
you can change it to { satellite | standalone | factory-default }.
Press ENTER to continue OR "edit" to change the chassis-role : standalone
Press "edit" to change OR ENTER to continue :
Step 13. At the prompt, press Enter. The following output is displayed.
Example
Chassis-role is set to standalone-vc, Do you wish to continue with this (yes/
no) :
Step 14.
At the prompt, enter yes. The following console output is displayed.
Example
VC Stack Node Type
--------------------
Current Vc Stack Node type of this card is : imm-only
Press ENTER to retain this,
or { cpm-imm } to change it to cpm-imm :
Step 15.
At the prompt, enter cpm-imm. The following output is displayed.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
708
SPACER TEXT
To Next Page
Loading...