Nokia 7210 SAS-Mxp - Page 83

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
The first screen displays the current statistics related to the specified MAC filter. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate per second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
mac-filter-id
Specifies the MAC filter policy ID.
Values 1 to 65535
entry entry-id
Displays information on the specified filter entry ID for the specified filter ID only.
Values 1 to 65535
interval seconds
Specifies the interval for each display in seconds.
Default 5 seconds
Values 3 to 60
repeat repeat
Specifies how many times the command is repeated.
Default 10
Values 1 to 999
absolute
Keyword to display the raw statistics, without processing. No calculations are performed on
the delta or rate statistics.
rate
Keyword to display the rate-per-second for each statistic instead of the delta.
Output
The following output is an example of MAC filter statistics.
Sample Output
A:ALA-1>monitor>filter# mac 50 entry 10 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for Mac filter 50 entry 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0 Egr. Matches : 0
------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
83
SPACER TEXT