CIBANO 500 PTM User Manual
116 OMICRON
16 Spare bushing data
The following table describes the spare bushing data.
Table 16-1: Spare bushing data
Data Description
Pos.
1
1. Only available for spare bushings mounted on another assets
Terminal of the asset to which the spare bushing is connected
Ratings
Rated frequency Rated frequency of the spare bushing
Insul. level LL (BIL) L-L basic impulse level rating of the spare bushing
Voltage L-ground Rated line-to-ground voltage
Max. system voltage Maximum voltage between phases during normal service
Rated current Rating current of the spare bushing
Manufacturer info
Catalog no. Catalog number of the spare bushing
Drawing no. Drawing number of the spare bushing
Style no. Style number of the spare bushing
Nominal values
PF (C1)/
DF (C1)/
Tanδ (C1)
2
2. Set by the selected profile
Power factor, dissipation factor, or tangent delta of the capacitance C1
between the top of the spare bushing and the voltage/test tap
Cap. (C1) Capacitance C1 between the top of the spare bushing and the voltage/test
tap
PF (C2)/
DF (C2)/
Tanδ (C2)
2
Power factor, dissipation factor, or tangent delta of the capacitance C2
between the voltage/test tap of the spare bushing and ground
Cap. (C2) Capacitance C2 between the voltage/test tap of the spare bushing and
ground
Other
Insulation type Insulation type of the spare bushing
Outer insulation type Outer insulation type of the spare bushing
Comment Comment on the spare bushing
Attachments Attachments to the spare bushing (see "Managing attachments" later in this
chapter)
To Next Page
Loading...
