Omicron CIBANO 500 PTM - 17.2.10 Testing with External Power Supply

CIBANO 500 PTM User Manual
212 OMICRON
17.2.10 Testing with external power supply
If you use an external power supply (for example, the station battery) for supplying the motor or the coils
of the circuit breaker during the test, connect the external power supply to the VIN input of CIBANO 500
and wire the N and BN sockets as shown in the following figure.
Figure 17-31: Wiring the CIBANO 500 sockets for testing with external power supply
Trip
coil
Manual
trip
Manual
close
AUX
trip
AUX
close
M
Wire the sockets
Close
coil