CIBANO 500 PTM User Manual
8 OMICRON
About this manual
This User Manual provides information on how to use the CIBANO 500 test system safely, properly and
efficiently. The CIBANO 500 PTM User Manual contains important safety instructions for working with
CIBANO 500 and gets you familiar with operating CIBANO 500. Following the instructions in this User
Manual will help you to prevent danger, repair costs, and avoid possible down time due to incorrect
operation.
The CIBANO 500 PTM User Manual always has to be available on the site where CIBANO 500 is used.
The users of CIBANO 500 must read this manual before operating CIBANO 500 and observe the safety,
installation, and operation instructions therein.
Reading the CIBANO 500 PTM User Manual alone does not release you from the duty to comply with
all national and international safety regulations relevant to working on high-voltage equipment.
Safety symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not observed.
NOTICE
Equipment damage or loss of data possible
To Next Page
Loading...
Need help?
General
