575
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
01 September 2002 Original production
03 July 2003 Added information on Sensor Connector Terminals, Remote I/O Terminals (with
relay outputs, and with three-tier terminal blocks), and MIL Connector Terminals
throughout the manual.
04 January 2004 Added information on Screw-less Clamp Terminals, Sensor Connector Terminals,
and detection functions throughout the manual.
05 July 2004 Added information on new analog slaves (High-resolution Analog Input Terminals
and Temperature Input Terminals).
06 September 2006 Added information on Advanced Environment-resistive Slaves throughout the
manual, including specifications, windows, and indicators.
Page 200, 227, 231, and 234: Changes made or information added to specifica-
tions.
Pages 201, 202, 221, 227, 228, 231, and 234: Information added on indicators.
Pages 207 and 208: Information added on windows.
Pages 208 and 209: Information added on status check boxes.
07 April 2008 Added information on Screw-less Clamp Terminals with 16 inputs and 16 outputs.
Cat. No. W404-E1-07
Revision code
To Previous Page
Loading...
Need help?
General
