Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 User Manual

233
SECTION 6
Environment-resistive Slaves
This section provides the specifications and describes the components, terminal arrangements, basic procedures for wiring,
and methods for connecting cables of Environment-resistive Slaves (conforming to IP67). Information on Slave settings,
mounting and wiring methods are also provided separately for each Slave type.
6-1 Common Specifications for Environment-resistive Slaves . . . . . . . . . . . . . . . 234
6-1-1 Current Consumption, Weight, Enclosure Ratings. . . . . . . . . . . . . . 235
6-1-2 I/O Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
6-2 Connecting Communications Cables to Environment-resistive Slaves . . . . . 236
6-2-1 System with Slaves Using Round Connectors Only. . . . . . . . . . . . . 236
6-2-2 System with Slaves Using Round Connectors and Regular Square
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
6-2-3 Communications Cables for Environment-resistive Terminals . . . . 237
6-2-4 Example System Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
6-3 Maintenance Information Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
6-3-1 Checking Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . 239
6-4 Advanced Environment-resistive Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . 245
6-4-1 Node Address, Baud Rate, and Output Hold/Clear Settings . . . . . . 245
6-4-2 Environment-resistive Terminals with 8 Transistor Inputs (IP67):
DRT2-ID08C (NPN) and DRT2-ID08C-1 (PNP). . . . . . . . . . . . . . . 245
6-4-3 Environment-resistive Terminals with 16 Transistor Inputs (IP67):
DRT2-HD16C (NPN) and DRT2-HD16C-1 (PNP) . . . . . . . . . . . . . 250
6-4-4 Environment-resistive Terminals with 8 Transistor Outputs (IP67):
DRT2-OD08C (NPN) and DRT2-OD08C-1 (PNP) . . . . . . . . . . . . . 255
6-5 Standard Environment-resistive Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
6-5-1 Node Address, Baud Rate, and Output Hold/Clear Settings . . . . . . 260
6-5-2 Environment-resistive Terminals with 4 Transistor Inputs (IP67):
DRT2-ID04CL (NPN) and DRT2-ID04CL-1 (PNP) . . . . . . . . . . . . 261
6-5-3 Environment-resistive Terminals with 8 Transistor Inputs (IP67):
DRT2-ID08CL (NPN) and DRT2-ID08CL-1 (PNP) . . . . . . . . . . . . 265
6-5-4 Environment-resistive Terminals with 16 Transistor Inputs (IP67):
DRT2-HD16CL (NPN) and DRT2-HD16CL-1 (PNP). . . . . . . . . . . 268
6-5-5 Environment-resistive Terminals with 4 Transistor Outputs (IP67):
DRT2-OD04CL (NPN) and DRT2-OD04CL-1 (PNP). . . . . . . . . . . 272
6-5-6 Environment-resistive Terminals with 8 Transistor Outputs (IP67):
DRT2-OD08CL (NPN) and DRT2-OD08CL-1 (PNP). . . . . . . . . . . 275
6-5-7 Environment-resistive Terminals with 16 Transistor Outputs (IP67):
DRT2-WD16CL (NPN) and DRT2-WD16CL-1 (PNP). . . . . . . . . . 278
6-5-8 Environment-resistive Terminals with 8 Transistor Inputs and
8 Transistor Outputs (IP67): DRT2-MD16CL (NPN) and
DRT2-MD16CL-1 (PNP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
6-6 Mounting and Wiring Environment-resistive Slaves . . . . . . . . . . . . . . . . . . . 286
6-6-1 Mounting in Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
6-6-2 Wiring the Internal Power Supply, I/O Power Supply, and I/O Lines 286

Omron DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008 Specifications

General

Brand	Omron
Model	DRT2 SERIES DEVICENET SLAVES - OPERATION MANUAL 04-2008
Category	Network Hardware
Language	English