Omron SYSDRIVE 3G3RV Series User Manual

5
-
12
*Only for (-E) model with V/f. Disabled for V/f with PG.
nDC Injection Braking: b2
Parameters for injection braking are shown in the following table.
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
b1-07
Operation
selection
after switch-
ing to
remote
mode
Used to set the operation
mode by switching to the
Remote mode using the
Local/Remote Key.
0: Run signals that are input
during mode switching
are disregarded. (Input
Run signals after
switching the mode.)
1: Run signals become
effective immediately
after switching to the
Remote mode.
0 or 1 0 No A A A 186H -
LOC/REM
RUN Sel
b1-08
Run com-
mand selec-
tion in
program-
ming modes
Used to set an operation
interlock in programming
modes.
0: Cannot operate.
1: Can operate (Disabled
when Digital Operator is
set to select run command
(when b1-02 = 0)).
0 or 1 0 No A A A 187H -
RUN CMD
at PRG
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
b2-01
Zero speed
level (DC
injection
braking
starting fre-
quency)
Used to set the frequency
which starts DC injection
braking in units of Hz when
deceleration to stop is
selected.
When b2-01 is less than E1-
09, E1-09 becomes the DC
injection braking starting
frequency.
0.0 to
10.0
0.5 Hz No A A A 189H 6-14
DCInj Start
Freq
b2-02
DC injec-
tion brak-
ing current
Sets the DC injection brak-
ing current as a percentage
of the Inverter rated current.
0 to
100
50%No AAA18AH
6-14
6-17
DCInj Cur-
rent
b2-03
DC injec-
tion brak-
ing time at
start
Used to set the time to per-
form DC injection braking at
start in units of 1 second.
Used to stop coasting motor
and restart it. When the set
value is 0, DC injection
braking at start is not per-
formed.
0.00
to
10.00
0.00 sNo AAA18BH6-17
DCInj
Time@Start

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English