Omron SYSDRIVE 3G3RV Series

I
nstallation Orientation and Space
1
-
1
7
K
KK
K Digital Operator Panel Cutout Dimensions
Fig 1.12 Digital Operator Panel Cutout Dimensions
IMPORTANT
1. The same space is required horizontally and vertically for both Closed Wall-mounting (IP20, NEMA 1)and
Open Chassis (IP00) Inverters.
2. The top and bottom covers must be romoved before installing a 200 or 400-V class Inverter with an output
of 18.5 kW or less in a panel.
Always provide enough space for suspension eye bolts and the main circuit lines when installing a 200 or
400-V class Inverter with an output of 22 kW or more in a panel.
70 70
14.5
2.5
20
44
15.8 6.4
60
57
120
111
120
Two M3
holes
Cutout
Mounting
panel