Omron SYSDRIVE 3G3RV Series

3
-
6
K
KK
K Switching Modes
The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Fig 3.3 Mode Transitions (Example for the 3G3IV-PJVOP161)
IMPORTANT
When running the Inverter after using Digital Operator, press the MENU Key to enter the Drive Mode (DRIVE
indicator will flash) and then press the ENTER Key from the Drive Mode display to bring up the monitor dis-
play (DRIVE indicator will light). Run commands can't be received from any other display. (Monitor display in
Drive Mode will appear when the power is turned ON.)
Drive Mode
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
MENU
MENU
Quick
Programming Mode
DRIVE QUICK
VERIFY
ADV
MENU
Advanced
Programming Mode
DRIVE QUICK
VERIFY
ADV
MENU
Verify Mode
DRIVE QUICK
VERIFY
ADV
MENU
Autotuning
Mode
(Operation possible)
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
Power ON
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
DRIVE QUICK
VERIFY
ADV
Mode Selection Displays
Monitor Displays
Setting Displays
When returning from a setting
display, the rightmost digit
of the monitor display will
flash.
If a user constant is changed
the number will be dislayed.
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
Lit Flashing Not lit
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING
AUTO
TUNING