Omron SYSDRIVE 3G3RV Series

6
-
142
nSetting Precautions
Parameter A1-05 cannot be displayed using normal key operations. To display A1-05, hold down the RESET
Key and press the MENU Key while A1-04 is displayed.
K
KK
K Displaying User-set Parameters Only
You can set and refer to parameters necessary to the Inverter only, using the A2 parameters (user-set parame-
ters) and A1-01 (Parameters Access Level).
Set the number of the parameter to which you want to refer in A2-01 to A2-32, and then set A1-01 to 1. You
can set and refer to parameters set in A1-01 to A1-03 and A2-01 to A2-32 only, using advanced programming
mode.
nRelated Parameters
A1-05
Password setting
Used to set a four digit number as the password.
This parameter is not usually displayed. When the
password (A1-04) is displayed, hold down the
RESET Key and press the Menu Key and the pass-
word will be displayed.
0 to
9999
0NoAAA
Select Password
Param-
eter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
V/f
V/f
with
PG
Open
Loop
Vec-
tor
LCD Display
A2-01
to
A2-32
User setting parameters
Used to set the parameter numbers that can be set/
read. Maximum 32.
Effective when the access level (A1-01) is set to
User Program (1). Parameters set in A2-01 to A2-
32 can be set/read in programming mode.
b1-01
to
o2-08
-NoAAA
User Param 1 to 32
Param-
eter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
V/f
V/f
with
PG
Open
Loop
Vec-
tor
LCD Display